Wczytywanie kursów wyceny...
Prognoza
Średnia cena docelowa analityków wynosi 5,45 € (+325,78%). Mediana wynosi 5,45 € (+325,78%).
| Kupuj |
7 |
| Trzymaj |
21 |
| Sprzedaj |
8 |
Dyskusje w społeczności
Nie ma jeszcze dyskusji o tym aktywie.
Rozpocznij dyskusjęWiadomości Przejdź do aktualności
3D Systems beats Q2 forecasts; stock jumps about 16% after results
3D Systems reported adjusted EPS of -$0.04 and revenue of $94.6 million for Q2, both slightly above analysts' expectations, after which the stock rose about 15.9%. The company recorded printer-hardware sales more than 40% higher year over year and improved adjusted EBITDA to a loss of $0.8 million. Management cites rising demand in aerospace, defense, dental, medical devices and data center infrastructure, and expects annual cost savings of more than $60 million from restructurings. For Q3 3D Systems expects revenue of $96–99 million and adjusted EBITDA of -$3 to -$1 million, while it advances expansion into the metal parts business and the rollout of new dental and metal printing platforms. » Więcej na de.investing.com
3D Systems joint venture NAMI receives license for military manufacturing in Saudi Arabia
The National Additive Manufacturing and Innovation Company (NAMI), a joint venture of 3D Systems, Dussur and Saudi Energy, has been granted a licence by the Saudi General Authority for Military Industries to produce regulated military components. The approval allows NAMI to qualify and manufacture with international OEMs for aerospace and defence in Saudi Arabia and supports Saudi Arabia’s "Vision 2030" goal of localising military spending. The licence expands NAMI’s addressable market in additive manufacturing and is intended to strengthen local on-demand production of mission-critical parts. » Więcej na de.investing.com
3D Systems supports FDA approval for 3D-printed titanium cranial plate with Walter Reed
3D Systems helped the 3D Medical Applications Center (3D MAC) of the Defense Health Agency and the Walter Reed National Military Medical Center obtain FDA approval for the 3D MAC Titanium Cranial Plate System. The approval is the first FDA clearance for an implant granted to a point-of-care facility and is aimed at active-duty U.S. service members with traumatic head injuries. 3D Systems provided expertise in quality management, design optimization, additive manufacturing workflows and regulatory strategy; the FDA submission number is K253116. » Więcej na de.investing.com
3D Systems ups share offering to $50 million, stock falls premarket
3D Systems increased the offering from an initial $40 million to $50 million and late Wednesday sold about 16.4 million shares at $3.05 each, a 15.5% discount to the previous closing price. The stock fell more than 14% in premarket trading to below $3.10. The company says it will use the net proceeds to fund operations and growth initiatives, including capital expenditures and working capital. Needham and Craig-Hallum acted as joint bookrunners; 3D Systems has about 146.9 million shares outstanding and had risen 92% in the quarter before the deal. » Więcej na de.investing.com
3D Systems places $50 million stock offering at $3.05 per share
3D Systems offered 16,393,443 common shares at $3.05 each and expects gross proceeds of about $50 million; the deal is expected to close on June 5, 2026. The offering price is below the current share price of $3.61. The company granted the syndicate a 30-day option to purchase up to 2,459,016 additional shares; Needham & Company and Craig‑Hallum are leading the syndicate. The registration statement was declared effective by the SEC on May 27, 2026. Analysts note high stock volatility and, according to InvestingPro, see only limited upside from the current level. » Więcej na de.investing.com
Historyczne dywidendy Dywidendy
Wszystkie wskaźniki dywidendowe Wszystkie wskaźnikiDane finansowe spółki
| (EUR) | wrzesień 2026 | YoY |
|---|---|---|
| Przychody | 87,67 mln | 12,75% |
| Zysk brutto | 30,71 mln | 22,45% |
| Zysk netto | -29,61 mln | 92,46% |
| EBITDA | -26,88 mln | 161,72% |
Dane fundamentalne
| Wskaźnik | Wartość |
|---|---|
Kapitalizacja rynkowa | 231,34 mln € |
Liczba akcji | 166,35 mln |
Maksimum/minimum z 52 tygodni | 3,74 € - 1,38 € |
| Dywidendy | Nie |
Beta | 2,85 |
C/Z (PE Ratio) | -3,21 |
PEG (PEG Ratio) | 0,01 |
C/WK (PB Ratio) | 1,01 |
C/S (PS Ratio) | 0,64 |
Profil spółki
3D Systems Corporation, poprzez swoje spółki zależne, oferuje rozwiązania w zakresie druku 3D i cyfrowej produkcji w Ameryce, Europie, na Bliskim Wschodzie, w Afryce oraz w regionie Azji i Pacyfiku. Firma oferuje drukarki 3D, takie jak drukarki stereolitograficzne, do selektywnego spiekania laserowego, do bezpośredniego druku metali, do druku wielostrumieniowego, do druku kolorowym strumieniem atramentu oraz do biodruku w technologii ekstruzji i SLA, które przekształcają dane cyfrowe wygenerowane przez oprogramowanie do projektowania 3D, oprogramowanie do projektowania wspomaganego komputerowo (CAD) lub inne narzędzia do projektowania 3D, w gotowe wydruki. Firma opracowuje, miesza i sprzedaje również różnorodne materiały do druku, takie jak tworzywa sztuczne, nylon, metal, kompozyty, elastomery, wosk, polimerowe materiały stomatologiczne oraz materiały biokompatybilne. Ponadto firma oferuje cyfrowe narzędzia projektowe, w tym oprogramowanie, skanery i urządzenia haptyczne, a także rozwiązania do projektowania produktów, symulacji, projektowania form i matryc, skanowania 3D i druku, inżynierii odwrotnej, obróbki maszynowej produkcji, metrologii oraz kontroli i procesów produkcyjnych pod marką Geomagic. Dalej firma oferuje 3D Sprint oraz 3DXpert, autorskie oprogramowanie do przygotowywania i optymalizacji danych CAD oraz zarządzania procesami produkcji addytywnej, które zapewnia automatyczne tworzenie i rozmieszczanie podpór, zarządzanie platformą druku, symulację druku oraz zarządzanie kolejką wydruków; a także Bioprint Pro, rozwiązanie programowe umożliwiające badaczom projektowanie i biodruk powtarzalnych eksperymentów. Dodatkowo firma świadczy usługi serwisowe i szkoleniowe, usługi produkcyjne oraz usługi w zakresie oprogramowania i precyzyjnej opieki zdrowotnej. Firma obsługuje przede wszystkim przedsiębiorstwa oraz małe i średnie firmy z branż medycznej, dentystycznej, motoryzacyjnej, lotniczej, dóbr trwałego użytku, administracji rządowej, obronnej, technologicznej, jubilerskiej, elektronicznej, edukacyjnej, dóbr konsumpcyjnych, energetycznej, biotechnologicznej i innych, za pośrednictwem bezpośredniej sprzedaży, partnerów kanałowych i wyznaczonych dystrybutorów. 3D Systems Corporation została założona w 1986 roku, a jej siedziba znajduje się w Rock Hill w Południowej Karolinie.
| Nazwa | 3D Systems |
| CEO | Jeffrey A. Graves |
| Siedziba | Rock Hill,
sc Stany Zjednoczone |
| Strona internetowa | |
| Sektor | Przemysł |
| Branża | Maszyny |
| Debiut giełdowy | 10.03.1988 |
| Pracownicy | 1418 |
Symbole giełdowe
| Giełda | Symbol |
|---|---|
NYSE | DDD |
London Stock Exchange | 0QYH.L |
XETRA | SYV.DE |
Frankfurt | SYV.F |
Düsseldorf | SYV.DU |
Hamburg | SYV.HM |
Milan | 1DDD.MI |
London | 0QYH.L |
SIX | DDD.SW |
München | SYV.MU |
Wien | DDD.VI |